点击图片查看大图
高低温湿热试验箱适用于电工、电子、仪器仪表及其它产品、零部件及材料在高低温、湿热环境下贮存、运输、使用时的适应性试验；是各类电子、电工、电器、塑胶等原材料和器件进行耐寒、耐热、耐湿、耐干性试验及品管工程的可靠性测试设备；特别适用于光纤、LED、晶体、电感、PCB、电池、电脑、手机等产品的耐高温、耐低温、耐湿热循环试。
High low temperature test chamber product use:
High low temperature test chamber is suitable for the electrical, electronics, instruments and meters and other products, spare parts and materials in the high and low temperature storage, transportation, hot and humid environment, when using the adaptability test; Is all kinds of electronics, electrical, electrical appliances, plastic raw materials and components such as cold and heat resistance, resistance to wet and dry test and quality control engineering reliability test equipment; Especially suitable for fiber optic, LED, crystal, inductance, PCB, battery, computers, mobile phones and other products of high temperature resistant, good low temperature resistance, resistance to wet and heat cycle test.
高低温湿热试验箱结构特点：
1.高低温湿热试验箱箱体采用数控机床加工成型，造型美观大方，并采用无反作用把手，操作简便。
2.内箱采用进口高级不锈钢（SUS304）镜面板，外箱采用（SUS304）拉丝不锈钢板或优质冷轧钢板喷塑，增加了外观质感和洁净度。
3.设有大型观测视窗附照明灯保持箱内明亮，且利用发热体内嵌式钢化玻璃，随时清晰的观测箱内状况。
4.箱体左侧配直径25mm或50mm或100mm的测试孔，可供外接测试电源线或信号线使用。
5.保温材质采用高密度玻璃纤维棉，厚度为80~100mm。门与箱体之间采用双层耐高低温之高张性密封条，以确保测试区的密封。
6.设有独立限温报警系统，超过限制温度及自动中断运行，保证试验安全进行不发生意外。
7.补水箱置于控制箱体右下部，并有缺水自动保护，更便利操作者补充水源。
8.加湿系统管路与控制线路板分开，可避免因加湿管路漏水发生故障，提高安全性。
9.水路系统管路电路系统采用门式开启，方便维护和检修。
10.试验箱底部采用高品质可固定式PU活动轮。
High low temperature test chamber structure features:
1. The high low temperature test chamber box body is made of the numerical control machine tool processing forming, modelling beautiful generous, and with no reaction handle, easy to operate.
2. Inside the box adopts import ed advanced stainless steel (SUS304) mirror plate, outside the box adopts (SUS304) wire drawing of stainless steel plate or high quality cold-rolled steel plate coating, increase the appearance quality and cleanliness.
3. Have large observation window attached to the lamp keep bright in the oven, and the use of heating body embedded toughened glass, clear observation of the condition in the cabinet at any time.
4. The box on the left side of the match or 50 mm or 100 mm diameter 25 mm test hole, used for external test power supply cord or signal lines.
5. Heat preservation material USES glass fiber cotton with high density, thickness of 80 ~ 100 mm. Between the door and cabinet adopts double high and low temperature resistance of t
